|
Hydraulic
Drum Brake Actuation Equipment
The parts listed
are an example of the vast AL-KO range of hydraulic components to
complement the range of hydraulic drum brakes.
MASTER CYLINDERS
AND ADAPTORS
| Part
No |
Description |
|
313001
|
Master cylinder 3/4"
|
|
313005
|
Master cylinder cap 3/4"
|
|
313003
|
Master cylinder
adaptor 3/16" pipe
|
|
313007
|
Master cylinder 7/8" suit AL-KO coupling
|
|
313008
|
Master cylinder
cap 7/8"
|
|
313011
|
Master cylinder 1" suit AL-KO coupling
|
|
313012
|
Master cylinder
cap suit 1" master cylinder
|
|
313013
|
Master cylinder bowl suit 7/8" (does
not include cap)
|
|
HOSES
| Part
No |
Description |
|
313020
|
Hose hydraulic male-male fittings
3/8" UNF
|
|
313021
|
Hose hydraulic 15 1/4" 3/8"
UNF male-female fittings
|
|
312022
|
Hose clip chassis
|
|
PIPING TUBE
NUTS AND FITTINGS
| Part
No |
Description |
| 313017 |
Tubing Bundy 3/16" x 17" |
| 313030 |
Tube nut long 3/16" tube |
| 313031 |
Tube nut
short 3/16" tube |
| 313032 |
Pipe joiner 3/16" tube |
| 333333 |
Three way
block 3/8" UNF |
| 313042 |
Tubing Bundy 3/16" x 42 1/2" |
| 313054 |
Tubing
Bundy 3/16" x 54 |
| 313056 |
Tubing Bundy 3/16" x 56 1/2" |
| 313066 |
Tubing
Bundy 3/16" x 66 |
| 313068 |
Tubing Bundy 3/16" x 68 1/2" |
| 313080 |
Tubing
Bundy 3/16" x 3.658 metre 3/16 long / 3/16 short tube
nut |
|
SENS-A-BRAKE - http://www.sensabrake.com/
Sens-a-Brake
has been enthusiastically received by the boating industry. All
trailers, by law, that weigh 2 tonne or over when loaded must incorporate
a power assisted brake application, and a break away system that
applies the trailer brakes automatically should the towing vehicle
and trailer become separated. Until recently, a vacuum system was
the only solution. This is not only expensive but often means the
warranty of the tow vehicle is voided.
By using the
Sens-a-Brake actuator the hydraulic disc brakes are now legal for
rigs over 2 tonne and perform exceptionally well. Sens-a-Brake is
made up of a trailer mounted actuator and a sophisticated in-car
kit which uses a unique pedal mounted pressure pad to provide proportional
trailer braking.
The Sens-a-Brake
actuator utilises stored energy (compressed air) and immediate braking
is available as soon as the driver applies pressure to the brake
pedal. This is a unique feature as other electro-hydraulic systems
are activated by pumping the brake to build up pressure causing
significant delay in braking in an emergency stopping situation.
When tri-axles
with hydraulic brakes or calipers are used then the “big bore”
Sens-a-Brake kit should be selected to ensure sufficient fluid displacement
is available to efficiently operate the brakes.
Sens-a-Brake
is easy to install for a new or an existing trailer and will give
boat owners peace of mind when towing.
| Part
No |
Description |
| 350002 |
Sens-a-Brake Actuator only |
| 350003 |
Sens-a-Brake Wiring Loom
only |
| 350004 |
Sens-a-Brake
Park Brake
Kit |
| 350005 |
Sens-a-Brake Manual Brake
Pad 45mm x 60mm |
| 350006 |
Sens-a-Brake
Automatic Brake Pad 45mm x 115m |
| 360007 |
Sens-a-Brake Electronic Control
Unit (E.C.U) |
| 350008 |
Sens-a-Brake
Mouse |
| 350013 |
Sens-a-Brake In-Car Kit complete |
| 350014 |
Sens-a-Brake
Full Actuator Kit |
| 350015 |
Sens-a-Brake 24v to 12v converter |
| 350024 |
Sens-a-Brake
Big Bore actuator only 25.4mm bore - tri-axle |
| 350025 |
Sens-a-Brake Big Bore
full actuator kit 25.4mm bore - tri-axle |
| 360016 |
Sens-a-Brake
Blanking Plug |
| 350045 |
Sens-a-Brake Pressure Bleed
Gun |
| 350035 |
Sens-a-Brake
Manual Brake Pad Suit U.S.A Vehicles 55mm x 80mm |
| 350036 |
Sens-a-Brake Automatic Brake
Pad Suit U.S.A Vehicles 60mm x 140mm |
|
|
